Texas Instruments INA106
The INA106 is a monolithic gain = 10 differential amplifier consisting of a precision operational amplifier (op amp) and on-chip metal film resistors. The resistors are laser trimmed for accurate gain and high common-mode rejection. The differential amplifier is the foundation of many commonly used circuits.| Part No. | INA106 |
|---|---|
| Datasheet | INA106 Download |
| Manufacturer |  Texas Instruments |
| Description | Precision Gain = 10 Differential Amplifier |
| Buy | Stock & Price |
FEATURES
● Gain of 10 difference amplifier configuration● High common-mode rejection (CMRR): 86dB (minimum)
● Low gain error: 0.025% (maximum)
● Low gain drift: 4ppm/°C (typical)
● Low nonlinearity: 0.001% (maximum)
● Bandwidth: 0.5MHz (typical)
● Low offset voltage: 200μV (maximum)
● Low offset voltage drift: 0.2μV/°C (typical) 2
APPLICATIONS
● Battery cell formation & test equipment● Sensor tag & data logger
● Servo drive position feedback
● Level transmitter
● String inverter 3
DESCRIPTION
Excellent tracking of resistors (TCR) maintains gain accuracy and common-mode rejection over temperature. The INA106 provides this precision circuit function without using an expensive resistor network. The INA106 is available in 8-pin plastic DIP and SOIC surface-mount packages. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) INA106 P (PDIP, 8) D (SOIC, 8) 9.81mm × 9.43mm 4.9mm × 6mm (1) For all available packages, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable.
