Datasheet4U Logo Datasheet4U.com

ISO1050 - CAN Transceiver

General Description

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard.

Key Features

  • Meets the requirements of ISO11898-2.
  • 5000-VRMS isolation (ISO1050DW).
  • 2500-VRMS isolation (ISO1050DUB).
  • Fail-safe outputs.
  • Low loop delay: 150 ns (typical), 210 ns (maximum).
  • 50-kV/μs typical transient immunity.
  • Bus-fault protection of.
  • 27 V to 40 V.
  • Driver (TXD) dominant time-out function.
  • I/O voltage range supports 3.3 V and 5 V microprocessors.
  • Safety-related certifications.
  • VDE approv.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISO100 Optically-Coupled Linear ISOLATION AMPLIFIER Burr-Brown Corporation
ISO1002 Small Signal Amplifier YUAN
ISO1003-xx-x Two Wires 4-20mA Isolated Signal Transmitter YUAN
ISO102 SIGNAL ISOLATION BUFFER AMPLIFIERS Burr-Brown Corporation
ISO103 Low-Cost/ Internally Powered ISOLATION AMPLIFIER Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
ISO1042 CAN Transceiver
ISO1042-Q1 Automotive Isolated CAN Transceiver
ISO1044 Isolated CAN FD Transceiver
ISO1176 RS-485 Profibus Transceiver
ISO1176T Profibus RS-485 Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISO1050 SLLS983L – JUNE 2009 – REVISED OCTOBER 2023 ISO1050 Isolated CAN Transceiver 1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) dominant time-out function • I/O voltage range supports 3.3 V and 5 V microprocessors • Safety-related certifications – VDE approval per DIN EN IEC 60747-17 (VDE 0884-17) – UL 1577 approved – CSA approved for IEC 61010-1, IEC 60601-1 – TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only) – CQC reinforced insulation per GB4943.