Datasheet4U Logo Datasheet4U.com

LM10000 - AVS System Controller

General Description

The LM10000 is used to enable Adaptive Voltage Scaling (AVS) to non-AVS regulators.

Key Features

  • 1.
  • 23 Flexible Enable Inputs to Allow Independent Enable Control of External Controller and LM10000.
  • Fault Input Restores Output Voltage Setting to Default Value.
  • CNTL_EN Output That Enables/Disables External Controller.
  • 7-Bit Current DAC That Can Directly Connect to the Feedback Node of an External Controller and Provide Smooth Voltage Control.
  • Programmable Slew Rate Control.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM100 Voltage Regulator Intersil
LM100 Voltage Regulator National Semiconductor
LM1001-7R 50 Watt AC-DC Converters Power-One
LM1001-7R 50 Watt DC-DC Converters Power-One
LM100SS1T522 LCD Module Sharp

Other Datasheets by Texas Instruments

Part Number Description
LM10010 VID Voltage Programmer
LM10011 6/4-Bit VID Programmable Current DAC
LM10 Operational Amplifier and Voltage Reference
LM101A-N Operational Amplifiers
LM101AJAN Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM10000 www.ti.com SNVS643C – JUNE 2010 – REVISED APRIL 2013 AVS System Controller Check for Samples: LM10000 FEATURES 1 •23 Flexible Enable Inputs to Allow Independent Enable Control of External Controller and LM10000 • Fault Input Restores Output Voltage Setting to Default Value • CNTL_EN Output That Enables/Disables External Controller • 7-Bit Current DAC That Can Directly Connect to the Feedback Node of an External Controller and Provide Smooth Voltage Control • Programmable Slew Rate Control APPLICATIONS • AVS-Enabled ASICs and FPGAs KEY SPECIFICATIONS • PWI 2.0 Interface • AVS Control for One Output • Precision Enable DESCRIPTION The LM10000 is used to enable Adaptive Voltage Scaling (AVS) to non-AVS regulators. It includes a complete Slave Power Controller (SPC 2.