Datasheet4U Logo Datasheet4U.com

LM1036 - Dual DC Operated Tone/Volume/Balance Circuit

General Description

The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.

An additional control input allows loudness compensation to be simply effected.

Key Features

  • 1.
  • 2 Wide Supply Voltage Range, 9V to 16V.
  • Large Volume Control Range, 75 dB Typical.
  • Tone Control, ±15 dB Typical.
  • Channel Separation, 75 dB Typical.
  • Low Distortion, 0.06% Typical for An Input Level of 0.3 Vrms.
  • High Signal to Noise, 80 dB Typical for an Input Level of 0.3 Vrms.
  • Few External Components Required.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM1036 DUAL DC OPERATED TONE/VOLUME BALANCE CIRCUITS National Semiconductor
LM1035 DUAL DC OPERATED TONE/VOLUME BALANCE CIRCUITS National Semiconductor
LM1037 Dual Four-Channel Analog Switch National
LM103AQ8 Dual Operational Amplifier CYStech Electronics
LM10 Operational Amplifier/Voltage National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM10 Operational Amplifier and Voltage Reference
LM10000 AVS System Controller
LM10010 VID Voltage Programmer
LM10011 6/4-Bit VID Programmable Current DAC
LM101A-N Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM1036 www.ti.com SNAS525C – JAN 1995 – REVISED APRIL 2013 LM1036 Dual DC Operated Tone/Volume/Balance Circuit Check for Samples: LM1036 FEATURES 1 •2 Wide Supply Voltage Range, 9V to 16V • Large Volume Control Range, 75 dB Typical • Tone Control, ±15 dB Typical • Channel Separation, 75 dB Typical • Low Distortion, 0.06% Typical for An Input Level of 0.3 Vrms • High Signal to Noise, 80 dB Typical for an Input Level of 0.3 Vrms • Few External Components Required DESCRIPTION The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems. An additional control input allows loudness compensation to be simply effected.