Datasheet4U Logo Datasheet4U.com

LM119QML - High Speed Dual Comparator

General Description

The LM119 is a precision high speed dual comparator fabricated on a single monolithic chip.

It is designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground.

Further, it has higher gain and lower input currents than devices like the LM710.

Key Features

  • 1.
  • 2 Available with radiation ensured.
  • High Dose Rate 100 krad(Si).
  • ELDRS Free 100 krad(Si).
  • Two independent comparators.
  • Operates from a single 5V supply.
  • Typically 80 ns response time at ±15V.
  • Minimum fan-out of 2 each side.
  • Maximum input current of 1 μA over temperature.
  • Inputs and outputs can be isolated from system ground.
  • High common mode slew rate.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM119 HIGH SPEED DUAL COMPARATORS STMicroelectronics
LM119 Dual Comparator Linear Technology
LM119 High Speed Dual Comparator National Semiconductor
LM119JAN High Speed Dual Comparator National Semiconductor
LM110 Voltage Follower National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM119 High Speed Dual Comparator
LM111 Differential Comparators
LM111-N Voltage Comparator
LM1117 800-mA Low-Dropout Linear Regulator
LM1117I 800-mA Low-Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM119QML www.ti.com SNOSAN3B – JULY 2008 – REVISED MARCH 2013 LM119QML High Speed Dual Comparator Check for Samples: LM119QML FEATURES 1 •2 Available with radiation ensured – High Dose Rate 100 krad(Si) – ELDRS Free 100 krad(Si) • Two independent comparators • Operates from a single 5V supply • Typically 80 ns response time at ±15V • Minimum fan-out of 2 each side • Maximum input current of 1 μA over temperature • Inputs and outputs can be isolated from system ground • High common mode slew rate DESCRIPTION The LM119 is a precision high speed dual comparator fabricated on a single monolithic chip. It is designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, it has higher gain and lower input currents than devices like the LM710.