LM139-SP Datasheet | Texas Instruments

Texas Instruments

LM139-SP

Overview

QML-V Qualified, SMD 5962-7700801VCA, 5962-9673802VCA and 5962-9673802V9B
Rad-Tolerant: 40 kRad/sec (Si) TID (5962-9673802VCA and 5962-9673802V9B) (1) - TID Dose Rate = 0.01 rad/sec (Si)
Wide Supply Ranges - Single Supply: 2 V to 36 V (Tested to 30 V) - Dual Supplies: ±1 V to ±18 V (Tested to ±15 V)
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typ)
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: 3 nA (Typ) (LM139)
Low Input Offset Voltage: 2 mV (Typ) (1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 0.01 rad/sec. Radiation lot acceptance testing is available - contact factory for details.
Common-Mode Input Voltage Range Includes Ground
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V
Low Output Saturation Voltage

LM139 — National Semiconductor — Low Power Low Offset Voltage Quad Comparators
LM139 — NXP Semiconductors — Quad voltage comparator
LM139 — ART CHIP — Low Power Low Offset Voltage Quad Comparators
LM139A — National Semiconductor — Voltage Comparators
LM139QML — National Semiconductor — Low Power Low Offset Voltage Quad Comparators
LM139A — Philips Semiconductors — Quad voltage comparator
LM133SS1T60 — Sharp Corporation — Color STN-LCD Module(Notebook PC)
LM137HV — Seme LAB — 1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE REGULATOR
LM138 — National Semiconductor — 5-Amp Adjustable Regulators
LM13X31 — Sharp Corporation — Color STN LCD Module