Datasheet4U Logo Datasheet4U.com

LM185-1.2QML - Micropower Voltage Reference Diode

General Description

The LM185-1.2 is a micropower 2-terminal band-gap voltage regulator diodes.

Key Features

  • 1.
  • 2 Operating Current of 10μA to 20mA.
  • 1Ω Maximum Dynamic Impedance (Typical).
  • Low Temperature Coefficient.
  • Radiation Qualified Option.
  • 100 krad.
  • Low Dose Rate Tested at 10 mrad/s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM185-1.2 Micropower Voltage Reference Diode National Semiconductor
LM185-1.2 Micropower Voltage Reference Linear
LM185-12 Micropower Voltage Reference Diode National Semiconductor
LM185-2.5 Micropower Voltage Reference Diode National Semiconductor
LM185-2.5 Micropower Voltage Reference Linear Technology

Other Datasheets by Texas Instruments

Part Number Description
LM185-1.2-N Micropower Voltage Reference Diode
LM185-2.5-N Micropower Voltage Reference Diode
LM185-2.5QML Micropower Voltage Reference Diode
LM185-ADJ Adjustable Micropower Voltage References
LM185QML Adjustable Micropower Voltage References

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM185-1.2QML www.ti.com SNVS384B – OCTOBER 2005 – REVISED JANUARY 2014 LM185-1.2QML Micropower Voltage Reference Diode Check for Samples: LM185-1.2QML FEATURES 1 •2 Operating Current of 10μA to 20mA • 1Ω Maximum Dynamic Impedance (Typical) • Low Temperature Coefficient • Radiation Qualified Option – 100 krad – Low Dose Rate Tested at 10 mrad/s DESCRIPTION The LM185-1.2 is a micropower 2-terminal band-gap voltage regulator diodes. Operating over a 10μA to 20mA current range, it features exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.