Datasheet4U Logo Datasheet4U.com

LM185-ADJ - Adjustable Micropower Voltage References

General Description

The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes.

Operating from 1.24 to 5.3V and over a 10μA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability.

Key Features

  • 1.
  • 2 Adjustable from 1.24V to 5.30V.
  • Operating Current of 10μA to 20mA.
  • 1% and 2% Initial Tolerance.
  • 1Ω Dynamic Impedance.
  • Low Temperature Coefficient.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM185-1.2 Micropower Voltage Reference Diode National Semiconductor
LM185-1.2 Micropower Voltage Reference Linear
LM185-12 Micropower Voltage Reference Diode National Semiconductor
LM185-2.5 Micropower Voltage Reference Diode National Semiconductor
LM185-2.5 Micropower Voltage Reference Linear Technology

Other Datasheets by Texas Instruments

Part Number Description
LM185-1.2-N Micropower Voltage Reference Diode
LM185-1.2QML Micropower Voltage Reference Diode
LM185-2.5-N Micropower Voltage Reference Diode
LM185-2.5QML Micropower Voltage Reference Diode
LM185QML Adjustable Micropower Voltage References

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 LM185/LM285/LM385 Adjustable Micropower Voltage References Check for Samples: LM185-ADJ, LM285-ADJ, LM385-ADJ FEATURES 1 •2 Adjustable from 1.24V to 5.30V • Operating Current of 10μA to 20mA • 1% and 2% Initial Tolerance • 1Ω Dynamic Impedance • Low Temperature Coefficient DESCRIPTION The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V and over a 10μA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only transistors and resistors, low noise and good long-term stability result.