LM1881 Datasheet | Texas Instruments

Features - 1 AC Coupled posite Input Signal - >10-kΩ Input Resistance - <10-m A Power Supply Drain Current - posite Sync and Vertical Outputs - Odd and Even Field Output - Burst Gate or Back Porch Output - Horizontal Scan Rates to 150 k Hz - Edge Triggered Vertical Output - Default Triggered Vertical Output for Non- Standard Video Signal (Video Games-Home puters) 3 Description The LM1881 Video sync separator extracts timing information including posite and vertical sync, burst or back porch timing, and odd and even field information from standard negative going sync NTSC, PAL (1) and SECAM video signals with amplitude from 0.5-V to 2-V p-p. The integrated circuit is also capable of providing sync separation for nonstandard, faster horizontal rate video signals. The vertical output is produced on the rising edge of the first serration in the vertical sync period. A default vertical output is produced after a time delay if the rising edge mentioned above does not occur within the externally set delay period, such as might be the case for a non-standard video signal. 2 Applications - Video Cameras and Recorders - Broadcasting Systems - Set-Top Boxes - Home Entertainment - puting and Gaming Applications Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SOIC (8) PDIP (8) 4.90 mm × 3.91 mm 9.81 mm × 6.35 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. (1) PAL in this datasheet refers to European broadcast TV standard “Phase Alternating Line”, and not to Programmable Array Logic. Typical Connection Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SNLS384G - FEBRUARY 1995 - REVISED JUNE 2015 .ti. Table of Contents 1 Features 1 2 Applications...