Datasheet4U Logo Datasheet4U.com

LM2775-Q1 - Switched Capacitor 5-V Boost Converter

General Description

The LM2775-Q1 is a regulated switched-capacitor doubler that produces a low-noise output voltage.

The LM2775-Q1 can supply up to 200 mA of output current over a 3.1-V to 5.5-V input range, as well as up to 125 mA of output current when the input voltage is as low as 2.7 V.

Key Features

  • Qualified for automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2770 High Efficiency Switched Capacitor Step-Down DC/DC Regulator National Semiconductor
LM2771 Low-Ripple 250mA Switched Capacitor Step-Down DC/DC Converter National Semiconductor
LM2772 Low-Ripple Switched Capacitor Step-Down Regulator National Semiconductor
LM2773 Low-Ripple 1.8V/1.6V Spread-Spectrum Switched Capacitor Step-Down Regulator National Semiconductor
LM27 Factory Preset Thermostat National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM2775 Switched Capacitor 5-V Boost Converter
LM2770 Step-Down DC/DC Regulator
LM2771 Step-Down DC/DC Converter
LM2772 Step-Down Regulator
LM2773 Step-Down Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SNVSAH6C – JUNE 2018 – REVISLLEMMD22M77A77Y552--QQ02111 SNVSAH6C – JUNE 2018 – REVISED MAY 2021 LM2775-Q1 Switched Capacitor 5-V Boost Converter 1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results – Device temperature grade 1: –40°C to +125°C ambient operating temperature range • 2.7-V to 5.5-V input range • Fixed 5-V output • 200-mA output current • Inductor-less solution: only requires 3 small ceramic capacitors • Shutdown disconnects load from VIN • Current limit and thermal protection • 2-MHz switching frequency • PFM operation during light load currents (PFM pin tied high) 2 Applications • Power for CAN transceiver • Millimeter wave radar • ADAS camera power supply 2.7 V to 5.5 V 2.