Datasheet4U Logo Datasheet4U.com

LM3253 Datasheet High-current Step-down Converter

Manufacturer: Texas Instruments

Overview: LM3253 www.ti.com SNVS791Q – FEBRUARY 2012 – REVISED MAY 2013 LM3253 High-Current Step-Down Converter for 2G/3G/4G RF Power Amplifiers Check for Samples:.

General Description

The LM3253 is a DC-DC converter optimized for powering multi-mode 2G/3G/4G RF power amplifiers (PAs) from a single Lithium-Ion cell.

The LM3253 steps down an input voltage from 2.7V to 5.5V to a dynamically adjustable output voltage of 0.4V to 3.6V.

The output voltage is set through a VCON analog input that adjusts the output voltage to ensure efficient operation at all power levels of the RF PA.

Key Features

  • 1.
  • 2 High-Efficiency PFM and PWM Modes with Internal Synchronous Rectification.
  • Analog Bypass Function with Low Dropout Resistance (45 mΩ typ. ).
  • Dynamically Adjustable Output Voltage, 0.4V to 3.6V (typ. ), in PFM and PWM modes.
  • 3A Maximum Load Current in PWM Mode.
  • 2.7MHz (average) PWM Switching Frequency.
  • Modulated Switching Frequency to Aid Rx Band Compliance.
  • Operates From a Single Li-ion Cell (2.7V to 5.5V).
  • ACB Reduces Ind.

More Datasheets from Texas Instruments

Part Number Description
LM320-N 3-Terminal Negative Regulators
LM3200 Step-Down DC-DC Converter
LM3203 Step-Down DC-DC Converter
LM3204 Step-Down DC-DC Converter
LM3205 Step-Down DC-DC Converter
LM3208 Step-Down DC-DC Converter
LM321 Low Power Single Operational Amplifier
LM321LV Low Voltage Operational Amplifiers
LM3224 615kHz/1.25MHz Step-up PWM DC/DC Converter
LM323-N 5-Volt Positive Regulator

LM3253 Distributor