Datasheet4U Logo Datasheet4U.com

LM3538 - 6-Channel WLED Driver

General Description

The LM3538 is a highly integrated LED driver capable of driving 6 LEDs in parallel for single display backlighting applications.

Independent LED control allows for a subset of the main display LEDs to be selected for partial illumination applications.

Key Features

  • 1 2Lighting:.
  • 6-channel Backlight Capability.
  • Internal ALS Engine; PWM Input to Support CABC.
  • Built-in Power Supply and Gain Control for Ambient Light Sensor.
  • Up to 90% Efficiency.
  • Adaptive Charge Pump with 1x and 1.5x Gains for Maximum Efficiency.
  • 128 Dimming Steps for Group A, Exponential or Linear Dimming Selectable by Register Setup.
  • 8 Linear Dimming States for Group B LDOs:.
  • 4 Programmable LDOs (300mA/150mA Output Curre.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM353 Dual Operational Amplifier Fairchild
LM3535 Multi-Display LED Driver National Semiconductor
LM35 Precision Centigrade Temperature Sensors National Semiconductor
LM350 Three-terminal Positive Voltage Regulator Motorola
LM350 3-Amp Adjustable Regulators National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM3530 High-Efficiency White-LED Driver
LM3532 High-Efficiency White LED Driver
LM3533 Complete Lighting-Power
LM3535 Multi-Display LED Driver
LM3537 8-Channel WLED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3538 www.ti.com SNVS674A – JUNE 2011 – REVISED MAY 2013 LM3538 6-Channel WLED Driver with Four Integrated LDOs Check for Samples: LM3538 FEATURES 1 2Lighting: • 6-channel Backlight Capability • Internal ALS Engine; PWM Input to Support CABC • Built-in Power Supply and Gain Control for Ambient Light Sensor • Up to 90% Efficiency • Adaptive Charge Pump with 1x and 1.5x Gains for Maximum Efficiency • 128 Dimming Steps for Group A, Exponential or Linear Dimming Selectable by Register Setup • 8 Linear Dimming States for Group B LDOs: • 4 Programmable LDOs (300mA/150mA Output Currents) • Default Startup Voltage States • Low Dropout Voltage: 100mV typ. at 150mA Load Current • LDO Input Voltage = 1.8V to VIN_A • Overload Protection Combined Common Features: • Wide Input Voltage Range: 2.