Datasheet4U Logo Datasheet4U.com

LM5034 - High Voltage Dual Interleaved Controller

General Description

The LM5034 dual current mode PWM controller contains all the

Key Features

  • 1.
  • 2 Two Independent PWM Current Mode Controllers.
  • Integrated High Voltage Startup Regulator.
  • Compound 2.5A Main Output Gate Drivers.
  • Single Resistor Oscillator Setting to 2 MHz.
  • Synchronizable Oscillator.
  • Active Clamp Gate Driver for P-Channel MOSFETs.
  • Adjustable Gate Drive Overlap Time.
  • Programmable Maximum Duty Cycle.
  • Maximum Duty Cycle Fold-Back at High Line Voltage.
  • Adjustable Timer for Hiccup Mode Curr.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM5034 High Voltage Dual Interleaved Current Mode Controller National Semiconductor
LM5030 100V Push-Pull Current Mode PWM Controller National Semiconductor
LM5032 High Voltage Dual Interleaved Current Mode Controller National Semiconductor
LM5033 100V Push-Pull Voltage Mode PWM Controller National Semiconductor
LM5035 PWM Controller with Integrated Half-Bridge and SyncFET Drivers National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM5030 100-V Push-Pull Current Mode PWM Controller
LM5032 High-Voltage Dual Interleaved Controller
LM5033 100-V Push-Pull Voltage Mode PWM Controller
LM5035 PWM Controller
LM5035A PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM5034 www.ti.com SNVS347A – FEBRUARY 2005 – REVISED APRIL 2013 LM5034 High Voltage Dual Interleaved Current Mode Controller with Active Clamp Check for Samples: LM5034 FEATURES 1 •2 Two Independent PWM Current Mode Controllers • Integrated High Voltage Startup Regulator • Compound 2.