LM5102 Datasheet | Texas Instruments

Product Folder Sample & Buy Technical Documents Tools & Software Support & munity SNVS268B - MAY 2004 - REVISED DECEMBER 2014 LM5102 High-Voltage Half-Bridge Gate Driver With Programmable Delay 1 Features - 1 Drives Both a High-Side and Low-Side N-Channel MOSFET - Independently Programmable High and Low Side Rising Edge Delay - Bootstrap Supply Voltage Range up to 118 V dc - Fast Turn-Off Propagation Delay (25 ns Typical) - Drives 1000-p F Loads with 15-ns Rise and Fall Times - Supply Rail Undervoltage Lockout - Low Power Consumption - Timer Can Be Terminated Midway Through Sequence 2 Applications - Current Fed Push-Pull Power Converters - Half and Full Bridge Power Converters - Synchronous Buck Converters - Two Switch Forward Power Converters - Forward with Active Clamp Converters 3 Description The LM5102 high-voltage gate driver is designed to drive both the high side and the low side N-Channel MOSFETs in a synchronous buck or a half bridge configuration. The floating high-side driver is capable of working with supply voltages up to 100 V. The outputs are independently controlled. The rising edge of each output can be independently delayed with a programming resistor. An integrated high voltage diode is provided to charge the high side gate drive bootstrap capacitor. A robust level shifter operates at high speed while consuming low power and providing clean level transitions from control logic to the high side gate driver. Undervoltage lockout is provided on both the low side and the high side power rails. This device is available in the standard VSSOP 10 pin and the WSON 10 pin packages. Device Information(1) PART...