Datasheet4U Logo Datasheet4U.com

LMH6612 - Single Supply 345 MHz Rail-to-Rail Output Amplifiers

Download the LMH6612 datasheet PDF. This datasheet also covers the LMH6611 variant, as both devices belong to the same single supply 345 mhz rail-to-rail output amplifiers family and are provided as variant models within a single manufacturer datasheet.

General Description

The LMH6611 (single, with shutdown) and LMH6612 (dual) are 345 MHz rail-to-rail output amplifiers consuming just 3.2 mA of quiescent current per channel and designed to deliver high performance in power conscious single supply systems.

Key Features

  • 1.
  • 23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, Unless Otherwise Specified.
  • Operating Voltage Range 2.7V to 11V.
  • Supply Current Per Channel 3.2 mA.
  • Small Signal Bandwidth 345 MHz.
  • Open Loop Gain 103 dB.
  • Input Offset Voltage (Limit at 25°C) ±1.5 mV.
  • Slew Rate 460 V/µs.
  • 0.1 dB Bandwidth 45 MHz.
  • Settling Time to 0.1% 67 ns.
  • Settling Time to 0.01% 100 ns.
  • SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP) 102 d.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LMH6611-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6601 2.4V CMOS Op Amp National Semiconductor
LMH6609 900MHz Voltage Feedback Op Amp National Semiconductor
LMH6622 Dual Wideband / Low Noise / 160MHz / Operational Amplifiers National Semiconductor
LMH6624 Single/Dual Ultra Low Noise Wideband Operational Amplifier National Semiconductor
LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6611 Single Supply 345 MHz Rail-to-Rail Output Amplifiers
LMH6618 1.25mA RRIO Operational Amplifiers
LMH6619 1.25mA RRIO Operational Amplifiers
LMH6619Q 1.25mA RRIO Operational Amplifiers
LMH6601 2.4-V CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMH6611, LMH6612 www.ti.com SNOSB00K – NOVEMBER 2007 – REVISED OCTOBER 2013 LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers Check for Samples: LMH6611, LMH6612 FEATURES 1 •23 VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, Unless Otherwise Specified. • Operating Voltage Range 2.7V to 11V • Supply Current Per Channel 3.2 mA • Small Signal Bandwidth 345 MHz • Open Loop Gain 103 dB • Input Offset Voltage (Limit at 25°C) ±1.5 mV • Slew Rate 460 V/µs • 0.1 dB Bandwidth 45 MHz • Settling Time to 0.1% 67 ns • Settling Time to 0.01% 100 ns • SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP) 102 dBc • Low Voltage Noise 10 nV/√Hz • Output current ±100 mA • CMVR −0.2V to 3.