Datasheet4U Logo Datasheet4U.com

LMH6643 - 75mA Rail-to-Rail Output Amplifiers

Download the LMH6643 datasheet PDF. This datasheet also covers the LMH6642 variant, as both devices belong to the same 75ma rail-to-rail output amplifiers family and are provided as variant models within a single manufacturer datasheet.

General Description

The LMH664X family true single supply voltage feedback amplifiers offer high speed (130 MHz), low distortion (

62 dBc), and exceptionally high output current (approximately 75 mA) at low cost and with reduced power consumption when compared against existing devices with similar performance.

Key Features

  • 1(VS = ±5 V, TA = 25°C, RL = 2 kΩ, AV = +1. Typical Values Unless Specified).
  • 3 dB BW (AV = +1) 130 MHz.
  • Supply Voltage Range 2.7 V to 12.8 V.
  • Slew Rate, (AV =.
  • 1) 130V/µs(1).
  • Supply Current (no load) 2.7 mA/amp.
  • Output Short Circuit Current +115 mA to 145 mA.
  • Linear Output Current ±75 mA.
  • Input Common Mode Volt. 0.5 V Beyond V.
  • , 1 V from V+.
  • Output Voltage Swing 40 mV from Rails.
  • Input Vol.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LMH6642-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6643 3V / Low Power / 130MHz / 75mA Rail-to-Rail Output Amplifiers National Semiconductor
LMH6643EP 75mA Rail-to-Rail Output Amplifiers National Semiconductor
LMH6640 TFT-LCD Single/ 16V Rail-to-Rail High Output Operational Amplifier National Semiconductor
LMH6640 TFT-LCD Single / 16V Rail-to-Rail High Output Operational Amplifier National Semiconductor
LMH6642 3V / Low Power / 130MHz / 75mA Rail-to-Rail Output Amplifiers National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6643Q-Q1 75mA Rail-to-Rail Output Amplifiers
LMH6640 16V Rail-to-Rail High Output Operational Amplifier
LMH6642 75mA Rail-to-Rail Output Amplifiers
LMH6642Q-Q1 75mA Rail-to-Rail Output Amplifiers
LMH6644 75mA Rail-to-Rail Output Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LMH6642, LMH6643, LMH6644 SNOS966Q – MAY 2001 – REVISED SEPTEMBER 2014 LMH664x Low Power, 130 MHz, 75 mA Rail-to-Rail Output Amplifiers 1 Features 1(VS = ±5 V, TA = 25°C, RL = 2 kΩ, AV = +1. Typical Values Unless Specified). • −3 dB BW (AV = +1) 130 MHz • Supply Voltage Range 2.7 V to 12.8 V • Slew Rate, (AV = −1) 130V/µs(1) • Supply Current (no load) 2.7 mA/amp • Output Short Circuit Current +115 mA to 145 mA • Linear Output Current ±75 mA • Input Common Mode Volt. 0.5 V Beyond V−, 1 V from V+ • Output Voltage Swing 40 mV from Rails • Input Voltage Noise (100 kHz) 17nV/√Hz • Input Current Noise (100 kHz) 0.