LMK60E2-156M
LMK60E2-156M is High-Performance Low Jitter Oscillator manufactured by Texas Instruments.
Features
- 1 Low Noise, High Performance
- Jitter: 150 fs RMS Typical Fout > 100 MHz
- PSRR:
- 60 d Bc, Robust Supply Noise Immunity
- Supported Output Format
- LVPECL, LVDS and HCSL up to 400 MHz
- Total Frequency Tolerance of ±50 ppm (LMK60X2) and ±25 ppm (LMK60X0)
- 3.3-V Operating Voltage
- Industrial Temperature Range (- 40ºC to +85ºC)
- 7-mm × 5-mm 6-pin Package That is Pin- patible With Industry Standard 7050 XO Package
2 Applications
- High-Performance Replacement for Crystal-, SAW-, or Silicon-Based Oscillators
- Switches, Routers, Network Line Cards, Base Band Units (BBU), Servers, Storage/SAN
- Test and Measurement
- Medical Imaging
- FPGA, Processor Attach
3 Description
The LMK60E2-156M device is a low jitter oscillator that generates a monly used reference clock. The device is pre-programmed in factory to support any reference clock frequency; supported output formats are LVPECL, LVDS, and HCSL up to 400 MHz. Internal power conditioning provide excellent power supply ripple rejection (PSRR), reducing the cost and plexity of the power delivery network. The device operates from a single 3.3-V ±5% supply.
PART NUMBER
LMK60E2156M
Device Information(1)
OUTPUT TOTAL FREQ
FREQ (MHz) STABILITY PACKAGE / SIZE
AND FORMAT
(ppm)
156.25 LVPECL
±50
6-pin QFM, 7 mm × 5 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
Pinout
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
SNAS718
- DECEMBER 2016
.ti.
Table of Contents
1 Features
1 2 Applications 1 3 Description
1 4 Revision History 2 5 Pin...
