Datasheet4U Logo Datasheet4U.com

LMP7717 - Decompensated Operational Amplifier

General Description

The LMP7717 (single) and the LMP7718 (dual) low noise, CMOS input operational amplifiers offer a low input voltage noise density of 5.8 nV/√Hz while consuming only 1.15 mA (LMP7717) of quiescent current.

Key Features

  • 1.
  • 23 (Typical 5V Supply, Unless Otherwise Noted).
  • Input Offset Voltage: ±150 µV (max).
  • Input Referred Voltage Noise: 5.8 nV/√Hz.
  • Input Bias Current: 100 fA.
  • Gain Bandwidth Product: 88 MHz.
  • Supply Voltage Range: 1.8V to 5.5V.
  • Supply Current Per Channel.
  • LMP7717: 1.15 mA.
  • LMP7718: 1.30 mA.
  • Rail-to-Rail Output Swing.
  • @ 10 kΩ Load: 25 mV from Rail.
  • @ 2 kΩ Load: 45 mV from Rail.
  • Ensure.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMP7711 CMOS Input Amplifier National Semiconductor
LMP7711 CMOS Input Amplifiers National Semiconductor
LMP7712 CMOS Input Amplifiers National Semiconductor
LMP7715 CMOS Input Amplifiers National Semiconductor
LMP7716 CMOS Input Amplifiers National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMP7711 Amplifiers
LMP7712 Amplifiers
LMP7715 Amplifiers
LMP7716 Amplifiers
LMP7716Q Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMP7717, LMP7718 www.ti.com SNOSAY7H – MARCH 2007 – REVISED MARCH 2013 88 MHz, Precision, Low Noise, 1.8V CMOS Input, Decompensated Operational Amplifier Check for Samples: LMP7717, LMP7718 FEATURES 1 •23 (Typical 5V Supply, Unless Otherwise Noted) • Input Offset Voltage: ±150 µV (max) • Input Referred Voltage Noise: 5.8 nV/√Hz • Input Bias Current: 100 fA • Gain Bandwidth Product: 88 MHz • Supply Voltage Range: 1.8V to 5.5V • Supply Current Per Channel – LMP7717: 1.15 mA – LMP7718: 1.30 mA • Rail-to-Rail Output Swing – @ 10 kΩ Load: 25 mV from Rail – @ 2 kΩ Load: 45 mV from Rail • Ensured 2.5V and 5.0V Performance • Total Harmonic Distortion: 0.