LMV824 Datasheet | Texas Instruments

FEATURES - 2.5-V, 2.7-V, and 5-V Performance - - 40°C to 125°C Operation - No Crossover Distortion - Low Supply Current at VCC+ = 5 V: - LMV821…0.3 m A Typ - LMV822…0.5 m A Typ - LMV824…1 m A Typ - Rail-to-Rail Output Swing - Gain Bandwidth of 5.5 MHz Typ at 5 V - Slew Rate of 1.9 V/µs Typ at 5 V DESCRIPTION / ORDERING INFORMATION The LMV821 single, LMV822 dual, and LMV824 quad devices are low-voltage (2.5 V to 5.5 V), low-power modity operational amplifiers. Electrical characteristics are very similar to the LMV3xx operational amplifiers (low supply current, rail-to-rail outputs, input mon-mode range that includes ground). However, the LMV8xx devices offer a higher bandwidth (5.5 MHz typical) and faster slew rate (1.9 V/µs typical). The LMV8xx devices are cost-effective solutions for applications requiring low-voltage/low-power operation and space-saving considerations. The LMV821 is available in the ultra-small DCK package, which is approximately half the size of SOT-23-5. The DCK package saves space on printed circuit boards and enables the design of small portable electronic devices (cordless and cellular phones, laptops, PDAs, PCMIA). It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity. LMV824 . . . D, DGV, OR PW PACKAGE (TOP VIEW) 1OUT 1IN - 1IN+ VCC+ 2IN+ 2IN - 2OUT 1 2 3 4 5 6 7 14 4OUT 13 4IN - 12 4IN+ 11 GND/VCC- 10 3IN+ 9 3IN- 8 3OUT LMV822 . . . D OR DGK PACKAGE (TOP VIEW) 1OUT 1IN - 1IN + GND/VCC- 1 2 3 4 8 VCC+ 7 2OUT 6 2IN - 5 2IN+ LMV821 . . . DBV OR DCK PACKAGE (TOP VIEW) IN + GND/VCC- IN - 1 2 3 5 VCC+ 4 OUT The LMV8xx devices are characterized for operation from - 40°C to 85°C. The LMV8xx I devices are characterized for operation from - 40°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data...