LP2986 Datasheet | Texas Instruments

Features - 1 Wide Supply Voltage Range (16 V Maximum) - Ultra-Low-Dropout Voltage - 0.5% Output Voltage Accuracy (A Grade) - Ensured 200-m A Output Current - < 1-μA Quiescent Current when Shutdown - Low GROUND Pin Current at All Loads - High Peak Current Capability (400 m A Typical) - Overtemperature/Overcurrent Protection - - 40°C to +125°C Junction Temperature Range 2 Applications - Cellular Phones - Palmtop/Laptop puters - Camcorders, Personal Stereos, Cameras 3 Description The LP2986 is a 200-m A high-precision LDO regulator with a wide input voltage supply. The device has two output voltage modes: a fixed-precision output mode and an adjustable output voltage via an external resistive divider. Using an optimized Vertically Integrated PNP (VIP) process, the LP2986 delivers superior performance: - Dropout Voltage: Typically 180 m V at 200-m A load, and 1 m V at 1-m A load. - GROUND Pin Current: Typically 1 m A at 200-m A load, and 200 μA at 10-m A load. - Sleep Mode: The LP2986 draws less than 1 μA quiescent current when SHUTDOWN pin is pulled low. - ERROR Flag: The built-in ERROR flag goes low when the output drops approximately 5% below nominal. - Precision Output: The standard product versions available can be pin-strapped (using the internal resistive divider) to provide output voltages of 5 V, 3.3 V, or 3 V with ensured accuracy of 0.5% (A grade) and 1% (standard grade) at room temperature. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SOIC (8) 4.90 mm × 3.91 mm VSSOP (8) 3.00 mm × 3.00 mm WSON (8) 4.00 mm × 4.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Simplified Schematic An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SNVS137I - MARCH 1999 - REVISED SEPTEMBER...