LPV531 Datasheet | Texas Instruments

URES - 2 (Typical 5V Supply, unless otherwise Noted.) - Supply Voltage 2.7V to 5.5V - Dynamic Power Mode Setting - Continuously Programmable Supply Current - Range 5 μA to 425 μA - Continuously Programmable Bandwidth - Range 73 k Hz to 4.6 MHz - Input mon Mode Voltage Range - 0.3V to 3.8V - CMRR 95 d B - Rail-to-Rail Output Voltage Swing - Input Offset Voltage 1 m V APPLICATIONS - AC Coupled Circuits - Portable Instrumentation - Active Filters Typical Application C1 R1 VIN R2 R3 +V R4 - + ISEL REXT C2 VOUT DESCRIPTION The LPV531 is an extremely versatile operational amplifier. A single external resistor gives the system designer the ability to define the quiescent current, gain bandwidth product and output short circuit current. This innovative feature gives the system designer a method to dynamically switch the power level to optimize the performance of the op amp and meet the system design requirements. The LPV531 can be tailored to a wide variety of applications. It offers the system designer the ability to dynamically trade off supply current for bandwidth by adjusting the current drawn from the ISEL pin using a DAC or switching in different value resistors in series with the ISEL pin. The LPV531 is capable of operating from 73 k Hz, consuming only 5 μA, to as fast as 4.6 MHz, consuming only 425 μA. The input offset voltage is relatively independent and therefore is not significantly affected by the chosen power...