Datasheet4U Logo Datasheet4U.com

LT1030C - QUADRUPLE LOW-POWER LINE DRIVER

General Description

The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current.

The device can be shut down to zero supply current.

Current limiting fully protects the outputs from externally applied voltages of ±30 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LT1030CS Quad Low Power Line Driver Linear Technology
LT1030 Quad Low Power Line Driver Linear Technology
LT103 LT Series: 25/30 WATT Wide Input Range ETC
LT1031 Precision 10 Volt Reference Linear Technology
LT1032 Quad Low Power Line Driver Linear Technology

Other Datasheets by Texas Instruments

Part Number Description
LT1037 PRECISION OPERATIONAL AMPLIFIERS
LT1037A PRECISION OPERATIONAL AMPLIFIERS
LT1039 Triple EIA-232 Line Transceiver
LT1004-1.2 Micropower Integrated Voltage References
LT1004-2.5 Micropower Integrated Voltage References

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LT1030C QUADRUPLE LOW-POWER LINE DRIVER D Low Supply Voltage . . . ±5 V to ±15 V D Supply Current . . . 500 µA Typical D Zero Supply Current When Shut Down D Outputs Can Be Driven ±30 V D Output Open When Off (3-State) D 10-mA Output Drive D Outputs of Several Devices Can Be Connected in Parallel D Meets or Exceeds the Requirements of ANSI EIA/TIA-232-F Specifications D Designed to Be Interchangeable With Linear Technology LT1030 SLLS048F – APRIL 1989 – REVISED APRIL 1998 D OR N PACKAGE (TOP VIEW) VCC– 1 IN1 2 OUT1 3 ON/OFF 4 IN2 5 OUT2 6 GND 7 14 VCC+ 13 STROBE 12 IN4 11 OUT4 10 NC 9 IN3 8 OUT3 NC – No internal connection description The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current.