Texas Instruments MAX202
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply.| Part No. | MAX202 |
|---|---|
| Datasheet | MAX202 Download |
| Manufacturer |  Texas Instruments |
| Description | 5-V Dual RS-232 Line Driver/Receiver |
| Buy | Stock & Price |
FEATURES
● Meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards● ESD protection for RS-232 bus pins: ±15kV human-body model
● Operates at 5V VCC supply
● Operates up to 120kbit/s
● Two drivers and two receivers
● Latch-up performance exceeds 100mA Per JESD 78, class II 2
APPLICATIONS
● Battery-powered systems● Notebooks
● Laptops
● Palmtop PCs
● Hand-held equipment 3
DESCRIPTION
The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) SOIC (D) (16) 9.9mm × 6mm MAX202 SOIC WIDE (DW) (16) 10.4mm × 10.3mm TSSOP (PW) (16) 5 mm x 6.4mm (1) For more Information, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable. 5V POWER 2 DIN TX 2 DOUT RS-232 ROUT 120 kb/s 15 kV HBM 2 2 RIN RX RS-232 Copyright © 2016, Texas Instruments Incorporated Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers.
