Datasheet4U Logo Datasheet4U.com

MAX3222E - 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER

General Description

The MAX3222E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

Key Features

  • 1.
  • ESD Protection for RS-232 Bus Pins.
  • ±15-kV Human-Body Model (HBM).
  • ±8-kV IEC61000-4-2, Contact Discharge.
  • ±15-kV IEC61000-4-2, Air-Gap Discharge.
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards.
  • Operates With 3-V to 5.5-V VCC Supply.
  • Operates up to 500 kbit/s.
  • Two Drivers and Two Receivers.
  • Low Standby Current . . . 1 μA Typ.
  • External Capacitors . . . 4 × 0.1 μF.
  • Accept.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX3222E True RS-232 Transceivers Maxim
MAX3222 True RS-232 Transceivers Maxim
MAX322 Precision / Dual-Supply / SPST Analog Switches Maxim
MAX3221 +3V to +5.5V RS-232 Transceivers Maxim
MAX3221E RS-232 Transceivers Maxim

Other Datasheets by Texas Instruments

Part Number Description
MAX3222 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver
MAX3221 3-V to 5.5-V RS-232 Line Driver/Receiver
MAX3221-EP 3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER
MAX3221E 3-V to 5.5-V Single-Channel RS-232 Line Driver/Receiver
MAX3223 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX3222E www.ti.com.......................................................................................................................................... SLLS708A – JANUARY 2006 – REVISED SEPTEMBER 2009 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION Check for Samples: MAX3222E FEATURES 1 • ESD Protection for RS-232 Bus Pins – ±15-kV Human-Body Model (HBM) – ±8-kV IEC61000-4-2, Contact Discharge – ±15-kV IEC61000-4-2, Air-Gap Discharge • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards • Operates With 3-V to 5.5-V VCC Supply • Operates up to 500 kbit/s • Two Drivers and Two Receivers • Low Standby Current . . . 1 μA Typ • External Capacitors . . . 4 × 0.1 μF • Accepts 5-V Logic Input With 3.