MSP430F5328-EP Datasheet | Texas Instruments

FEATURES - 2 Low Supply Voltage Range: 3.6 V Down to 1.8 V - 16-Bit Timer TA0, Timer_A With Five Capture/pare Registers - Ultralow Power Consumption - Active Mode (AM): All System Clocks Active 290 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical) 150 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical) - Standby Mode (LPM3): Real-Time Clock With Crystal , Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical) Low-Power Oscillator (VLO), General Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.4 µA at 3 V (Typical) - Off Mode (LPM4): Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up: 1.1 µA at 3 V (Typical) - Shutdown Mode (LPM4.5): 0.18 µA at 3 V (Typical) - Wake-Up From Standby Mode in 3.5 µs (Typical) - 16-Bit RISC Architecture, Extended Memory, Up to 25-MHz System Clock - Flexible Power Management System - Fully Integrated LDO With Programmable Regulated Core Supply Voltage - 16-Bit Timer TA1, Timer_A With Three Capture/pare Registers - 16-Bit Timer TA2, Timer_A With Three Capture/pare Registers - 16-Bit Timer TB0, Timer_B With Seven Capture/pare Shadow Registers - Two Universal Serial munication Interfaces - USCI_A0 and USCI_A1 Each Support: - Enhanced UART Supports Auto Baudrate Detection - Ir DA Encoder and Decoder - Synchronous SPI - USCI_B0 and USCI_B1 Each Support: - I2CTM - Synchronous SPI - Integrated 3.3-V Power System - 12-Bit Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan Feature - parator - Hardware Multiplier Supporting 32-Bit Operations - Serial Onboard Programming, No External Programming Voltage Needed - Three Channel Internal DMA - Basic Timer With Real-Time Clock Feature - Family Members are Summarized in - Supply Voltage Supervision, Monitoring, and Brownout - Unified Clock System - FLL Control Loop for Frequency Stabilization - For plete Module Descriptions, See...