MSP430F6765 Datasheet | Texas Instruments

Overview 1.1 Features - Accuracy < 0.1% Over 2000:1 Dynamic Range for Phase Current - Meets or Exceeds ANSI C12.20 and IEC 62053 Standards - Support for Multiple Sensors Such as Current Transformers, Rogowski Coils, or Shunts - Power Measurement for up to Three Phases Plus Neutral - Dedicated Pulse Output Pins for Active and Reactive Energy for Calibration - Four-Quadrant Measurement per Phase or Cumulative - Exact Phase Angle Measurements - Digital Phase Correction for Current Transformers - Temperature pensated Energy Measurements - 40-Hz to 70-Hz Line Frequency Range Using Single Calibration - Flexible Power Supply Options With Automatic Switching - Display Operates at Very Low Power During AC Mains Failure: 3 µA in LPM3 - LCD Driver With Contrast Control for up to 320 Segments - Password-Protected Real-Time Clock (RTC) With Crystal Offset Calibration and Temperature pensation - Integrated Security Modules to Support Anti Tamper and Encryption - Multiple munication Interfaces for Smart Meter Implementations - High-Performance 25-MHz CPU With 32-Bit Multiplier 1.2 Applications - 3-Phase Electronic Watt-Hour Meters - Utility Metering - Wide Input Supply Voltage Range: 3.6 V Down to 1.8 V - Ultra-Low Power Consumption During Energy Measurement - 2.9 m W at 10-MHz Operation (3 V) - Multiple Low-Power Modes - Standby Mode (LPM3): 2.1 µA at 3 V, Wake up in Less Than 5 µs - RTC Mode (LPM3.5): 0.34 µA at 3 V - Shutdown Mode (LPM4.5): 0.18 µA at 3 V - Up to 512KB of Single-Cycle Flash - Up to 32KB of RAM With Single-Cycle Access - Up to Seven Independent 24-Bit Sigma-Delta ADCs With Differential Inputs and Variable Gain - System 10-Bit 200-ksps...