Datasheet4U Logo Datasheet4U.com

OPA2834 - Voltage-Feedback Amplifier

General Description

The OPA2834 is a dual-channel, ultra-low-power, railto-rail output, negative-rail input, voltage-feedback (VFB) operational amplifier designed to operate over a power-supply range of 2.7 V to 5.4 V with a single supply, or ±1.35 V to ±2.7 V with a dual supply.

Key Features

  • 1 Ultra-low power:.
  • Supply voltage: 2.7 V to 5.4 V.
  • Quiescent current (IQ): 170 µA/ch (typical).
  • Bandwidth: 50 MHz (G = 1 V/V).
  • Slew rate: 26 V/µs.
  • Settling time (0.1%): 88 ns (2-VSTEP).
  • HD2, HD3:.
  • 131 dBc,.
  • 146 dBc at 10 kHz (2 VPP).
  • Input voltage noise: 12 nV/√Hz (f = 10 kHz).
  • Input offset voltage: 350 µV (±1.9 mV max).
  • Negative rail input, rail-to-rail output (RRO).
  • Input voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPA2830 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2832 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2822 Low-Power / Single-Supply / Wideband Operational Amplifier Burr-Brown
OPA2827 OPERATIONAL AMPLIFIER Burr-Brown
OPA2889 Voltage Feedback OPERATIONAL AMPLIFIER Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
OPA2830 OPERATIONAL AMPLIFIER
OPA2832 OPERATIONAL AMPLIFIER
OPA2835 VFB Op Amp
OPA2836 OPERATIONAL AMPLIFIER
OPA2837 Voltage-Feedback Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community OPA2834 SBOS973A – JUNE 2019 – REVISED SEPTEMBER 2019 OPA2834 50-MHz, 170-µA, Negative-Rail In, Rail-to-Rail Out, Voltage-Feedback Amplifier 1 Features •1 Ultra-low power: – Supply voltage: 2.7 V to 5.4 V – Quiescent current (IQ): 170 µA/ch (typical) • Bandwidth: 50 MHz (G = 1 V/V) • Slew rate: 26 V/µs • Settling time (0.1%): 88 ns (2-VSTEP) • HD2, HD3: –131 dBc, –146 dBc at 10 kHz (2 VPP) • Input voltage noise: 12 nV/√Hz (f = 10 kHz) • Input offset voltage: 350 µV (±1.9 mV max) • Negative rail input, rail-to-rail output (RRO) – Input voltage range: –0.2 V to 3.