Texas Instruments PCF8574
The PCF8574 device provides general-purpose remote I/O expansion for most microcontroller families by way of the I2C interface [serial clock (SCL), serial data (SDA)]. The device features an 8-bit quasi-bidirectional I/O port (P0–P7), including latched outputs with highcurrent drive capability for directly driving LEDs. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal.FEATURES
● Low standby-current consumption of 10μA max● I2C to parallel-port expander
● Open-drain interrupt output
● Compatible with most microcontrollers
● Latched outputs with high-current drive capability for directly driving LEDs
● Latch-up performance exceeds 100mA per JESD 78, Class II 2
APPLICATIONS
● Telecom shelters: filter units● Servers
● Routers (telecom switching equipment)
● Personal computers
● Personal electronics
● Industrial automation
● Products with GPIO-limited processors 3
DESCRIPTION
This 8-bit input/output (I/O) expander for the two-line bidirectional bus (I2C) is designed for 2.5V to 6V VCC operation. At power on, the I/Os are high. In this mode, only a current source to VCC is active. Package Information PART NUMBER PACKAGE (1) PACKAGE SIZE(2) TVSOP (DGV, 20) 5mm × 6.40mm SOIC (DW, 16) 10.3mm × 10.3mm PCF8574 PDIP (N, 16) TSSOP (PW,20) 19.3mm × 9.4mm 6.5mm × 6.4mm VQFN (RGT, 16) 3mm × 3mm VQFN (RGY, 20) 4.5mm × 3.5mm (1) For more information, see Section 11. (2) The package size (length × width) is a nominal value and includes pins, where applicable.