Datasheet4U Logo Datasheet4U.com

SN54ALVTH16374 - 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS

General Description

The 'ALVTH16374 devices are 16-bit edge-triggered D-type flip-flops with 3-state outputs designed for 2.5-V or 3.3-V VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

Key Features

  • State-of-the-Art Advanced BiCMOS Technology (ABT) Widebus™ Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation.
  • Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V to 3.6-V VCC).
  • Typical VOLP (Output Ground Bounce).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54ALVTH16373 16-BIT TRANSPARENT D-TYPE LATCHES
SN54ALVTH162244 16-BIT BUFFERS/DRIVERS
SN54ALVTH162245 16-BIT BUS TRANSCEIVERS
SN54ALVTH16240 16-BIT BUFFERS/DRIVERS
SN54ALVTH16244 16-BIT BUFFERS/DRIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN54ALVTH16374, SN74ALVTH16374 2.5-V/3.3-V 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS SCES068G – JUNE 1996 – REVISED NOVEMBER 2006 FEATURES • State-of-the-Art Advanced BiCMOS Technology (ABT) Widebus™ Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation • Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V to 3.6-V VCC) • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • High Drive (–24/24 mA at 2.5-V VCC and –32/64 mA at 3.