Datasheet4U Logo Datasheet4U.com

SN54HC191 - 4-BIT SYNCHRONOUS UP/DOWN BINARY COUNTERS

Datasheet Summary

Description

The ’HC191 devices are 4-bit synchronous, reversible, up/down binary counters.

Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic.

📥 Download Datasheet

Datasheet preview – SN54HC191

Datasheet Details

Part number SN54HC191
Manufacturer Texas Instruments
File Size 1.09 MB
Description 4-BIT SYNCHRONOUS UP/DOWN BINARY COUNTERS
Datasheet download datasheet SN54HC191 Datasheet
Additional preview pages of the SN54HC191 datasheet.

📁 Similar Datasheet

  • SN54HC595J - 16-bit bus transceiver and transparant D-type latch (nexperia)
  • SN54LS00 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS01 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS02 - QUAD 2-INPUT NOR GATE (Motorola Inc)
  • SN54LS03 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS04 - HEX INVERTER (Motorola Inc)
  • SN54LS05 - HEX INVERTER (Motorola Inc)
  • SN54LS08 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS09 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS10 - TRIPLE 3-INPUT NAND GATE (Motorola Inc)
Other Datasheets by Texas Instruments
  • SN54HC193 - 4-BIT SYNCHRONOUS UP/DOWN COUNTERS
  • SN54HC195 - 4-BIT PARALLEL-ACCESS SHIFT REGISTERS
  • SN54HC195J - 4-BIT PARALLEL-ACCESS SHIFT REGISTERS
  • SN54HC10 - TRIPLE 3-INPUT POSITIVE-NAND GATES
  • SN54HC109 - DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
  • SN54HC10J - TRIPLE 3-INPUT POSITIVE-NAND GATES
  • SN54HC11 - Triple 3-Input AND Gates
  • SN54HC112 - DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS

Full PDF Text Transcription

Click to expand full text
SN54HC191, SN74HC191 4ĆBIT SYNCHRONOUS UP/DOWN BINARY COUNTERS D Wide Operating Voltage Range of 2 V to 6 V D Outputs Can Drive Up To 10 LSTTL Loads D Low Power Consumption, 80-µA Max ICC D Typical tpd = 13 ns D ±4-mA Output Drive at 5 V D Low Input Current of 1 µA Max D Single Down/Up Count-Control Line D Look-Ahead Circuitry Enhances Speed of Cascaded Counters D Fully Synchronous in Count Modes D Asynchronously Presettable With Load Control description/ordering information The ’HC191 devices are 4-bit synchronous, reversible, up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic.
Published: |