Datasheet4U Logo Datasheet4U.com

SN65DPHY440SS Datasheet Csi-2/dsi Dphy Re-timer

Manufacturer: Texas Instruments

Overview: Product Folder Order Now Technical Documents Tools & Software Support & munity SN65DPHY440SS, SN75DPHY440SS SLLSEO9C – MARCH 2016 – REVISED AUGUST 2019 SNx5DPHY440SS CSI-2/DSI DPHY Re-timer.

General Description

The DPHY440 is a one to four lane and clock MIPI DPHY re-timer that regenerates the DPHY signaling.

The device plies with MIPI DPHY 1.1 standard and can be used in either a MIPI CSI-2 or MIPI DSI application at datarates of up to 1.5 Gbps.

The device pensates for PCB, connector, and cable related frequency loss and switching related loss to provide the optimum electrical performance from a CSI2/DSI source to sink.

Key Features

  • 1 MIPI DPHY 1.1 Specification compliant.
  • Enables low-cost cable solutions.
  • Supports up to 4 lanes at 1.5 Gbps.
  • CSI-2/DSI Clock rates from 100 MHz To 750 MHz.
  • Sub mW Power in shutdown state.
  • MIPI DSI Bi-directional LP mode supported.
  • Supports for both ULPS and LP power states.
  • Adjustable output voltage swing.
  • Selectable TX Pre-emphasis levels.
  • Adjustable Rx EQ to compensate for ISI loss.
  • Configurabl.

More Datasheets from Texas Instruments

Part Number Description
SN65DP141 DisplayPort Linear Redriver
SN65DP149 3.4 Gbps DP++ to HDMI Retimer
SN65DP159 6-Gbps AC-Coupled TMDS to HDMI Level Shifter Retimer
SN65DSI83 Single-Channel DSI to Single-Link LVDS Bridge
SN65DSI83-Q1 Automotive Single-Channel MIPI DSI to Single-Link LVDS Bridge
SN65DSI84 Single Channel DSI to Dual-Link LVDS Bridge
SN65DSI84-Q1 Automotive Single Channel DSI to Dual-Link LVDS Bridge
SN65DSI85 Dual Channel DSI to Dual-Link LVDS Bridge
SN65DSI86 MIPI DSI to eDP Bridge
SN65DSI86-Q1 MIPI DSI to eDP Bridge

SN65DPHY440SS Distributor