Datasheet4U Logo Datasheet4U.com

SN65MLVD201 - MULTIPOINT-LVDS LINE DRIVER AND RECEIVER

Description

The SN65MLVD201, 203, 206, and 207 are multipoint-low-voltage differential (M-LVDS) line drivers and receivers, which are optimized to operate at signaling rates up to 200 Mbps.

All parts comply with the multipoint low-voltage differential signaling (M-LVDS) standard TIA/EIA-899.

Features

  • 1.
  • Low-Voltage Differential 30-Ω to 55-Ω Line Drivers and Receivers for Signaling Rates(1) Up to 200 Mbps.
  • Type-1 Receivers Incorporate 25 mV of Hysteresis.
  • Type-2 Receivers Provide an Offset (100 mV) Threshold to Detect Open-Circuit and Idle-Bus Conditions.
  • Meets or Exceeds the M-LVDS Standard TIA/EIA-899 for Multipoint Data Interchange.
  • Controlled Driver Output Voltage Transition Times for Improved Signal Quality.
  • -1 V to 3.4 V Common-Mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN65004 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65007 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65010 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65012 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65016 One Channel Direct Drive Speech Controller SONiX Technology Company

Other Datasheets by Texas Instruments

Part Number Description
SN65MLVD200 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD200A Multipoint-LVDS Line Driver and Receiver
SN65MLVD200B Multipoint-LVDS Line Drivers and Receivers
SN65MLVD202 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD202A Multipoint-LVDS Line Driver and Receiver

Full PDF Text Transcription

Click to expand full text
www.ti.com SN65MLVD201, SN65MLVD203 SN65MLVD206, SN65MLVD207 SLLS558C – DECEMBER 2002 – REVISED JANUARY 2007 MULTIPOINT-LVDS LINE DRIVER AND RECEIVER FEATURES 1 • Low-Voltage Differential 30-Ω to 55-Ω Line Drivers and Receivers for Signaling Rates(1) Up to 200 Mbps • Type-1 Receivers Incorporate 25 mV of Hysteresis • Type-2 Receivers Provide an Offset (100 mV) Threshold to Detect Open-Circuit and Idle-Bus Conditions • Meets or Exceeds the M-LVDS Standard TIA/EIA-899 for Multipoint Data Interchange • Controlled Driver Output Voltage Transition Times for Improved Signal Quality • -1 V to 3.4 V Common-Mode Voltage Range Allows Data Transfer With 2 V of Ground Noise • Bus Pins High Impedance When Disabled or VCC ≤ 1.
Published: |