SN74ABTH245
SN74ABTH245 is OCTAL BUS TRANSCEIVERS manufactured by Texas Instruments.
description
These octal bus transceivers are designed for asynchronous munication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated.
A8
B8
SN54ABTH245 . . . J OR W PACKAGE SN74ABTH245 . . . DB, DGV, DW, N, OR PW PACKAGE
(TOP VIEW)
DIR 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6 7 A7 8 A8 9
GND 10
20 VCC 19 OE 18 B1 17 B2 16 B3 15 B4 14 B5 13 B6 12 B7 11 B8
SN54ABTH245 . . . FK PACKAGE (TOP VIEW)
A1
A2
3 2 1 20 19
A3 4
18 B1
A4 5
17 B2
A5 6
16 B3
A6 7
15 B4
A7 8
14 B5
9 10 11 12 13
B7
B6
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN54ABTH245 is characterized for operation over the full military temperature range of
- 55°C to 125°C. The SN74ABTH245 is characterized for operation from
- 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA...
