SN74AC244-EP Datasheet | Texas Instruments

FEATURES - Controlled Baseline - One Assembly/Test Site, One Fabrication Site - Extended Temperature Performance of - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - 2-V to 6-V VCC Operation - Inputs Accept Voltages to 6 V - Max tpd of 7.5 ns at 5 V (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. SN74AC244-EP OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS SCAS723B - OCTOBER 2003 - REVISED APRIL 2006 DW OR NS PACKAGE (TOP VIEW) 1OE 1 1A1 2 2Y4 3 1A2 4 2Y3 5 1A3 6 2Y2 7 1A4 8 2Y1 9 GND 10 20 VCC 19 2OE 18 1Y1 17 2A4 16 1Y2 15 2A3 14 1Y3 13 2A2 12 1Y4 11 2A1 DESCRIPTION This octal buffer and line driver is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The SN74AC244-EP device is organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION - 55°C to 125°C SOIC - DW SOP - NS PACKAGE (1) Tape and reel Tape and reel ORDERABLE PART NUMBER SN74AC244MDWREP SN74AC244MNSREP TOP-SIDE MARKING SAC244MEP SAC244MEP (1) Package drawings, standard packing...