SN74AHCT374 Datasheet | Texas Instruments

Features - Inputs are TTL-Voltage patible - Latch-up performance exceeds 250 m A per JESD 2 Applications - Programmable Logic Controller (PLC) - DCS and PAC: Analog Input Module - Trains, Trams, and Subway Carriages - AC Inverter Drives - Printers 3 Description The 'AHCT374 devices are octal edge-triggered Dtype flip-flops that feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs. Package Information PART NUMBER PACKAGE1 BODY SIZE (NOM) DB (SSOP, 20) 7.20 mm × 5.30 mm DW (SOIC, 20) N (PDIP, 20) 12.80 mm × 7.50 mm 24.33 mm × 6.35 mm PW (TSSOP, 20) 6.50 mm × 4.40 mm 1. For all available packages, see the orderable addendum at the end of the data sheet. Logic Diagram (Positive Logic) An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA. SN54AHCT374, SN74AHCT374 SCLS241M - OCTOBER 1995 - REVISED APRIL 2023 .ti. Table of Contents 1 Features 1 2 Applications 1 3 Description 1 4 Revision History 2 5 Pin Configuration and Functions 3 6 Specifications 4 6.1 Absolute Maximum Ratings 4 6.2 ESD Ratings...