SN74AHCT541-EP - OCTAL BUFFER/DRIVER

Product Overview

Texas Instruments

Part number	SN74AHCT541-EP
Manufacturer	Texas Instruments
File Size	1.21 MB
Description	OCTAL BUFFER/DRIVER
Datasheet	SN74AHCT541-EP Datasheet
Additional preview pages of the SN74AHCT541-EP datasheet.

ordering information The SN74AHCT541 octal buffer/driver is ideal for driving bus lines or buffer memory address registers.This device

inputs and outputs on opposite sides of the package to facilitate printed circuit board layout. The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum v.

📁 Similar Datasheet

Other Datasheets by Texas Instruments

Published: Nov 18, 2022 |