Datasheet4U Logo Datasheet4U.com

SN74ALVCH16344 - 1-BIT TO 4-BIT ADDRESS DRIVER

General Description

This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation.

The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.

Key Features

  • Member of the Texas Instruments Widebus™ Family.
  • Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors.
  • Latch-Up Performance Exceeds 250 mA Per JESD 17.
  • ESD Protection Exceeds JESD 22.
  • 2000-V Human-Body Model (A114-A).
  • 200-V Machine Model (A115-A).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74ALVCH16334 16-BIT UNIVERSAL BUS DRIVER
SN74ALVCH16373 16-BIT TRANSPARENT D-TYPE LATCH
SN74ALVCH16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74ALVCH162244 16-BIT BUFFER/DRIVER
SN74ALVCH162260 12-BIT TO 24-BIT MULTIPLEXED D-TYPE LATCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com FEATURES • Member of the Texas Instruments Widebus™ Family • Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors • Latch-Up Performance Exceeds 250 mA Per JESD 17 • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) DESCRIPTION/ORDERING INFORMATION This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.