SN74AS651 Datasheet | Texas Instruments

description SN54ALS’, SN54AS’ . . . FK PACKAGE (TOP VIEW) OEAB SAB CLKAB NC VCC CLKBA SAB These devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEAB and OEBA) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select real-time or stored data transfer. The circuitry used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition between stored and real-time data. A low input level selects real-time data, and a high input level selects stored data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the octal bus transceivers and registers 4 3 2 1 28 27 26 A1 5 25 OEBA A2 6 24 B1 A3 7 23 B2 NC 8 22 NC A4 9 21 B3 A5 10 20 B4 A6 11 19 B5 12 13 14 15 16 17 18 A7 A8 GND NC B8 B7 B6 - No internal connection Data on the A or B data bus, or both, can be stored in the internal D-type flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) terminals, regardless of the select- or output-control terminals. When SAB and SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last state. The -1 versions of the SN74ALS651A and SN74ALS652A are identical to the standard versions except that the remended maximum IOL for the -1 versions is increased to 48 m A. There are no -1 versions of the SN54ALS652, SN54ALS653, SN74ALS653, and SN74ALS654. Please be aware that an important notice concerning availability, standard warranty, and use in critical...