Datasheet4U Logo Datasheet4U.com

SN74AVCB164245 - 16-BIT DUAL-SUPPLY BUS TRANSCEIVER

Description

This 16-bit (dual-octal) noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.4 V to 3.6 V.

Features

  • Member of the Texas Instruments Widebus™ Family.
  • DOC™ Circuitry Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation.
  • Dynamic Drive Capability Is Equivalent to Standard Outputs With IOH and IOL of ±24 mA at 2.5-V VCC.
  • Control Inputs VIH/VIL Levels Are Referenced to VCCB Voltage.
  • If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State.
  • Overvoltage-Tolerant Inputs/Outputs Allow Mixed-V.

📥 Download Datasheet

Datasheet preview – SN74AVCB164245

Datasheet Details

Part number SN74AVCB164245
Manufacturer Texas Instruments
File Size 967.05 KB
Description 16-BIT DUAL-SUPPLY BUS TRANSCEIVER
Datasheet download datasheet SN74AVCB164245 Datasheet
Additional preview pages of the SN74AVCB164245 datasheet.

📁 Similar Datasheet

  • SN74101 - AND-OR Gate (ETC)
  • SN74102 - AND Gate (ETC)
  • SN74103 - Dual J-K Flip-Flop (ETC)
  • SN74106 - Dual J-K Flip-Flop (ETC)
  • SN74108 - Dual J-K Flip Flop (ETC)
  • SN7411 - Triple 3-Input AND (ETC)
  • SN74120 - Dual Pulse Synchronizers / Drivers (Texas Instruments Inc)
  • SN74124 - Dual Voltage Controlled Oscillators (ETC)
  • SN7415 - Triple 3 Input AND Gate (Motorola)
  • SN74381 - integrated circuits (ETC)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
www.ti.com SN74AVCB164245 16-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES394D – JUNE 2002 – REVISED JUNE 2005 FEATURES • Member of the Texas Instruments Widebus™ Family • DOC™ Circuitry Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation • Dynamic Drive Capability Is Equivalent to Standard Outputs With IOH and IOL of ±24 mA at 2.5-V VCC • Control Inputs VIH/VIL Levels Are Referenced to VCCB Voltage • If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State • Overvoltage-Tolerant Inputs/Outputs Allow Mixed-Voltage-Mode Data Communications • Ioff Supports Partial-Power-Down Mode Operation • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over Full 1.4-V to 3.
Published: |