Datasheet4U Logo Datasheet4U.com

SN74CBT3305C - DUAL FET BUS SWITCH

General Description

The SN74CBT3305C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay.

2 V by sensing a

Key Features

  • Undershoot Protection for OFF Isolation on A and B Ports up to.
  • 2 V.
  • Bidirectional Data Flow With Near-Zero Propagation Delay.
  • Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typ).
  • Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5 pF Typ).
  • Data and Control Inputs Provide Undershoot Clamp Diodes.
  • Low Power Consumption (ICC = 3 µA Max).
  • VCC Operating Range From 4 V to 5.5 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74C74N Dual D-Type Flip-Flop ETC
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74CBT3306 DUAL FET BUS SWITCH
SN74CBT3306C DUAL FET BUS SWITCH
SN74CBT3306CD DUAL FET BUS SWITCH
SN74CBT3306D DUAL FET BUS SWITCH
SN74CBT3345 8-BIT FET BUS SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74CBT3305C DUAL FET BUS SWITCH 5-V BUS SWITCH WITH –2-V UNDERSHOOT PROTECTION SCDS125B – SEPTEMBER 2003 – REVISED AUGUST 2005 FEATURES • Undershoot Protection for OFF Isolation on A and B Ports up to –2 V • Bidirectional Data Flow With Near-Zero Propagation Delay • Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typ) • Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5 pF Typ) • Data and Control Inputs Provide Undershoot Clamp Diodes • Low Power Consumption (ICC = 3 µA Max) • VCC Operating Range From 4 V to 5.5 V • Data I/Os Support 0- to 5-V Signaling Levels (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V) • Control Inputs Can Be Driven by TTL or 5-V/3.