SN74CBTLV3861-Q1 Datasheet | Texas Instruments

description /ordering information The SN74CBTLV3861 provides ten bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. DW OR PW PACKAGE (TOP VIEW) NC 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6 7 A7 8 A8 9 A9 10 A10 11 GND 12 24 VCC 23 OE 22 B1 21 B2 20 B3 19 B4 18 B5 17 B6 16 B7 15 B8 14 B9 13 B10 - No internal connection The device is organized as one 10-bit bus switch. When output enable (OE) is low, the 10-bit bus switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION† PACKAGE‡ ORDERABLE PART NUMBER TOP-SIDE MARKING - 40°C to 85°C SOIC - DW TSSOP - PW Tape and reel Tape and reel CCBTLV3861IDWRQ1 CCBTLV3861IPWRQ1 CL3861Q1 CL3861Q1 † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at .ti.. ‡ Package drawings, thermal data, and symbolization are available at .ti./packaging. FUNCTION TABLE INPUT OE FUNCTION A port = B port Disconnect Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing...