SN74CBTS3384 Datasheet | Texas Instruments

description /ordering information The SN74CBTS3384 provides ten bits of high-speed TTL-patible bus switching with Schottky diodes on the I/Os to clamp undershoot. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as two 5-bit bus switches with separate output-enable (OE) inputs. When OE is low, the switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports. SN74CBTS3384 10-BIT FET BUS SWITCH WITH SCHOTTKY DIODE CLAMPING SCDS024M - MAY 1995 - REVISED JULY 2003 DB, DBQ, DGV, DW, OR PW PACKAGE (TOP VIEW) 1OE 1 1B1 2 1A1 3 1A2 4 1B2 5 1B3 6 1A3 7 1A4 8 1B4 9 1B5 10 1A5 11 GND 12 24 VCC 23 2B5 22 2A5 21 2A4 20 2B4 19 2B3 18 2A3 17 2A2 16 2B2 15 2B1 14 2A1 13 2OE ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING SOIC - DW Tube Tape and reel SN74CBTS3384DW SN74CBTS3384DWR CBTS3384 SSOP - DB Tape and reel SN74CBTS3384DBR CR384 - 40°C to 85°C SSOP (QSOP) - DBQ TSSOP - PW Tape and reel Tube Tape and reel SN74CBTS3384DBQR SN74CBTS3384PW SN74CBTS3384PWR CBTS3384 CR384 TVSOP - DGV Tape and reel SN74CBTS3384DGVR CR384 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. FUNCTION TABLE (each 5-bit bus switch) INPUTS INPUTS/OUTPUTS 1OE 2OE 1B1- 1B5 2B1-...