SN74LS2323 Datasheet | Texas Instruments

description /ordering information This device consists of a dual single-ended line receiver with TTL-patible strobes and outputs. The reference voltage (switching threshold) is applied externally and can be adjusted from 1.5 V to 3.4 V, making it possible to optimize noise immunity for a given system design. Due to the low input current (less than 100 µA), the device is suited ideally for party-line (data-bus) systems. The SN74LS2323 has a mon reference-voltage pin and a mon strobe. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING 0°C to 70°C SOIC - D Tube Tape and reel SN74LS2323D LS2323 SN74LS2323DR † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. FUNCTION TABLE (each receiver) LINE INPUT STROBE OUTPUT ≤(VREF - 100 m V) ≥(VREF + 100 m V) H = high level, L = low level, X = irrelevant Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright  2004, Texas Instruments Incorporated 1 SN74LS2323 DUAL LINE RECEIVER SDLS965 - OCTOBER 2004 logic diagram (positive logic) 2 STRB 1LINE...