SN74LS294 Datasheet | Texas Instruments

Features - 1 Count Divider Chain - Digitally Programmable from 22 to 2n (n = 31 for SN74LS292 , n = 15 for SN74LS294) - Useable Frequency Range from DC to 30 MHz - Easily Expandable 2 Applications - Frequency Division - Digital Timing 3 Description The SN74LS29x devices are programmable frequency dividers and digital timers contain 31 flipflops plus 30 gates (in SN74LS292) or 15 flip-flops plus 29 gates (in SN74LS294) on a single chip. The count modulo is under digital control of the inputs provided. Both types feature an active-low CLR clear input to initialize the state of all flip-flops. To facilitate the ining inspection, test points are provided (TP1, TP2, and TP3 on the SN74LS292, and TP on the SN74LS294). These test points are not intended to drive system loads. Both types feature two clock inputs; either one may be used for clock gating (see Table 1). A brief look at the digital timing capabilities of the SN74LS292 shows that with a 1-MHz input frequency, programming for 210 gives a period of 1.024 ms, 220 gives a period of 1.05 sec, 226 gives a period of 1.12 min, and 231 gives a period of 35.79 min. These devices are easily cascadable, giving limitless possibilities to achievable timing delays. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SN74LS292N SN74LS294N PDIP (16) 6.35 mm × 19.30 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Logic Symbols 'LS292 11 R é êë fi 2n ù úû CLK1 4 CLK2 5 n=0 fi n=1 3 TP1 6 TP2 13 TP3 A 10 0 15...