SN74LVC2T45 Overview
This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 5.5V.
SN74LVC2T45 Key Features
- Fully configurable dual-rail design allows each port to operate over the full 1.65-V to 5.5-V powersupply range
- VCC isolation feature
- if either VCC input is at GND, both ports are in the high-impedance state
- DIR input circuit referenced to VCCA
- Low power consumption, 4-μA maximum ICC
- Available in the Texas Instruments NanoFree™
- ±24-mA output drive at 3.3 V
- Ioff supports Partial-Power-Down mode operation
- Maximum data rates
- 420 Mbps (3.3-V to 5-V translation)