Datasheet4U Logo Datasheet4U.com

SN74LVC32245 - 32-BIT BUS TRANSCEIVER

General Description

This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC32245 is designed for asynchronous communication between data buses.

The control-function implementation minimizes external timing requirements.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC32244 32-BIT BUFFER/DRIVER
SN74LVC32373A 32-BIT TRANSPARENT D-TYPE LATCH
SN74LVC32374A 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74LVC32A Quadruple 2-Input Positive-OR Gates
SN74LVC32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
D Member of the Texas Instruments Widebus+ Family D Operates From 1.65 V to 3.6 V D Inputs Accept Voltages to 5.5 V D Max tpd of 4 ns at 3.3 V D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C SN74LVC32245 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS SCES343D – OCTOBER 2000 – REVISED JULY 2003 D Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C D Ioff Supports Partial-Power-Down Mode Operation D Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC) description/ordering information This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC32245 is designed for asynchronous communication between data buses.