Datasheet4U Logo Datasheet4U.com

SN74LVC373A-Q1 - OCTAL TRANSPARENT D-TYPE LATCH

General Description

The SN74LVC373A octal transparent D-type latch is designed for 2.7-V to 3.6-V VCC operation.

While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs.

When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.

Key Features

  • 1.
  • Qualified for Automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC373A-EP OCTAL TRANSPARENT D-TYPE LATCH
SN74LVC373A OCTAL TRANSPARENT D-TYPE LATCH
SN74LVC374A Octal Edge-Triggered D-Type Flip-Flop
SN74LVC374A-EP Octal Edge-Triggered D-Type Flip-Flop
SN74LVC374A-Q1 Octal Edge-Triggered D-Type Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LVC373A-Q1 OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS SCAS710B – SEPTEMBER 2003 – REVISED FEBRUARY 2008 FEATURES 1 • Qualified for Automotive Applications • ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) • Operates From 2 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 7.5 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.