Datasheet4U Logo Datasheet4U.com

SN74LVCZ240A - OCTAL BUFFER/DRIVER

General Description

This octal buffer/driver is designed for 2.7-V to 3.6-V VCC operation.

The SN74LVCZ240A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

Key Features

  • Operates From 2.7 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 6.5 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C.
  • Ioff and Power-Up 3-State Support Hot Insertion.
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Clas.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVCZ244A Octal Buffer/Driver
SN74LVCZ245A OCTAL BUS TRANSCEIVER
SN74LVCZ161284A 19-BIT IEEE STD 1284 TRANSLATION TRANSCEIVER
SN74LVCZ16240A 16-BIT BUFFER/DRIVER
SN74LVCZ16244A 16-BIT BUFFER/DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com FEATURES • Operates From 2.7 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.5 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Ioff and Power-Up 3-State Support Hot Insertion • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.