Datasheet4U Logo Datasheet4U.com

SN74LVT162244A - 3.3-V ABT 16-BIT BUFFERS/DRIVERS

General Description

The 'LVT162244A devices are 16-bit buffers and line drivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer.

Key Features

  • Members of the Texas Instruments Widebus™ Family.
  • Output Ports Have Equivalent 22-Ω Series Resistors, So No External Resistors Are Required.
  • Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC).
  • Support Unregulated Battery Operation Down to 2.7 V.
  • Typical VOLP (Output Ground Bounce).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVT162240 3.3-V ABT 16-BIT BUFFERS/DRIVERS
SN74LVT162245A 3.3-V ABT 16-BIT BUS TRANSCEIVERS
SN74LVT16240 3.3-V ABT 16-BIT BUFFERS/DRIVERS
SN74LVT16244B 3.3-V ABT 16-BIT BUFFERS/DRIVERS
SN74LVT16245A 3.3-V ABT 16-BIT BUS TRANSCEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com FEATURES • Members of the Texas Instruments Widebus™ Family • Output Ports Have Equivalent 22-Ω Series Resistors, So No External Resistors Are Required • Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) • Support Unregulated Battery Operation Down to 2.7 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Ioff and Power-Up 3-State Support Hot Insertion • Distributed VCC and GND Pins Minimize High-Speed Switching Noise • Flow-Through Architecture Optimizes PCB Layout • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) SN54LVT162244A, SN74LVT162244A 3.