Datasheet4U Logo Datasheet4U.com

SN75177B Datasheet Differential Bus Repeaters

Manufacturer: Texas Instruments

Overview: SN75177B, SN75178B DIFFERENTIAL BUS REPEATERS • Meets EIA Standards RS-422-A and RS-485 and CCITT Remendations V.11 and X.27 • Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments • 3-State Outputs • Bus Voltage Range . . . – 7 V to 12 V • Positive and Negative Current Limiting • Driver Output Capability . . . 60 mA Max • Driver Thermal Shutdown Protection • Receiver Input Impedance . . . 12 kΩ Min • Receiver Input Sensitivity . . . ± 200 mV • Receiver Input Hysteresis . . .

General Description

SLLS002C – D2606, JULY 1985 – REVISED FEBRUARY 1993 SN75177B .

.

.

Key Features

  • high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common-mode input voltage range of.
  • 7 V to 12 V. The driver features thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The driver is designed to drive current loads up to 60 mA maximum. The SN75177B and SN75178B are designed for optimum performance when used on transmission buses e.

More Datasheets from Texas Instruments

Part Number Description
SN751701 LINE DRIVER/RECEIVER
SN75172 QUADRUPLE DIFFRENTIAL LINE DRIVER
SN75173 QUADRUPLE DIFFERENTIAL LINE RECEIVERS
SN751730 Triple Line Driver/Receiver
SN751730D Triple Line Driver/Receiver
SN751730N Triple Line Driver/Receiver
SN75173D QUADRUPLE DIFFERENTIAL LINE RECEIVERS
SN75173N QUADRUPLE DIFFERENTIAL LINE RECEIVERS
SN75174 QUADRUPLE DIFFERENTIAL LINE DRIVER
SN75174N QUADRUPLE DIFFERENTIAL LINE DRIVER

SN75177B Distributor